Products Category

Clean And Dust-Free Oven With Mature Process, Baking Equipment For Solid Glue Packaging Process, Can Be Customized And Developed

Clean And Dust-Free Oven With Mature Process, Baking Equipment For Solid Glue Packaging Process, Can Be Customized And Developed

FYD-TM330

Consult

Features Technical Indicators Overall Dimension

Advantages of TM330 dust-free oven
※ The temperature rises faster and the exhaust valve is closed by default during the heating process, which overcomes the heat loss of the manual valve when it is fully or semi-open during the heating process.
※ The temperature uniformity is good, and the temperature curve of the multi-point test has good temperature concentration.
※ The parallel air transport mode of hot air spraying from the back to the front reduces the flow distance of the hot air in the constant temperature bath, and also reduces the dust impact between the upwind sample and the downwind sample.
※ Space-saving design, TM330 provides a large internal space.
TM330 dust-free oven standard features
1. Programming function: Program function - 4 groups of programs, each group of programs has 10 segments, a total of 40 program segments).
2. Alarm function: The temperature control instrument provides an upper and lower limit temperature difference alarm function - it only alarms but does not stop heating.
3. Electromagnetic door locking function: When the equipment stops running or the constant temperature ends, the timer starts (positive timer). It will automatically unlock when the timer is over. An alarm will appear while unlocking. It cannot be unlocked during operation. (Note: For the purpose of timing, stop heating and turn on the exhaust to cool down to 50℃).
4. Automatic exhaust function: the exhaust valve automatically closes during operation and opens automatically at the end.
5. Button and control protection: In addition to the power button and instrument operation button, other uncommon operation buttons, timers, over-temperature controllers, differential pressure gauges, etc. are equipped with protective covers on the control panel.
6. Standard three-color warning lights: running-green, fault-red, end-yellow.

Model		TM80-6	TM100-4	TM165-2
Luck mode		Forced air supply circulation, horizontal air transport
Performance	Temperature range	Room temperature +30~200°C
	Temperature fluctuations	±0.5℃（at 200℃）
	Temperature distribution accuracy	±2℃ （at 200℃）
	Heating time	The maximum temperature of 200°C arrives in about 60 minutes (to 200°C).
	Cleanliness	The temperature is kept at 100 level (0.5um particles) when the temperature is constant
Constitute	Combinations	6 slot combination	4 slot combination	2 slot combinations
	Liner material	SUS304# stainless steel plate
	Outer box material	The outer box material is mainly made of brushed stainless steel plate or SS41# carbon steel plate (smooth coating and baking paint after phosphoric acid film salt treatment), which can prevent fine dust
	Insulation	Aluminum silicate insulation cotton or ultra-fine glass wool
	heater	Stainless steel heating tubes
	Circulating motors	Centrifugal blades, high-temperature self-cooling motor 120W, 1 per tank
	Differential pressure gauge	Analog 0~500Pa
	Lead holes	Inner diameter 50mm (one on the right side)
	filter	Heat-resistant HEPA filter (dust collection efficiency: 0.3um particles 99.97% or more).
	N2 import interface	Outer diameter 8mm pagoda joint
Controller	Temperature control	Japanese conductive temperature controller PID control mode
	timer	1 minute ~ 99 hours 59 minutes and 100 ~ 999 hours 50 minutes (with timer waiting function)
	Run the function	Fixed-value run, program run
	Program mode	The program runs 4 sets of 10 segments (40 segments× 1, 20 segments× 2, 10 segments × 4).
	Additional features	Deviation correction function, key lock function, power failure compensation function
	sensor	PT100 platinum resistance (temperature regulator and overlift preventer).
Safety devices		Leakage protection, phase sequence protection, temperature over-temperature protection, motor over-current protection, key lock function
Specification	Single-slot inner size	400×500×400	500×500×400	550×600×500
	(D×W×H mm)
	Outer dimensions	1200×1880×1980	1250×1880×1980	1200×1000×1500
	(D×W×H mm)
	The volume of a single slot	80L	100L	150L
	shelves	2 floors	2 floors	2 floors
	Heating power	2 KW×6	2KW×4	3KW×2
	Power supply (50Hz)	Single-phase AC220V, 13KW	Three-phase AC220V, 9 KW	Three-phase AC380V, 7KW